HIẾT BỊ ĐO ÁP LỰC BẰNG TAY

GE Druck DPI 705T

DPI-705: Ranges 0 to 1 psi through to 10,000 psi
DPI-705R: Ranges 5 psi through to 10,000 psi
0.1% full scale (FS) accuracy
Rugged, lightweight handheld design
Leak test, tare, max/min and filter
Impact resistant, sealed to Type 12/IP54
Clear high resolution LCD
Carrying case with belt loop
Long battery life
Integral desk stand and hanger
Standard ranges available from stock
Optional pneumatic and hydraulic hand pumps
Click here for the DPI-705R Remote Sensor Version

The GE Druck DPI 705 Series of handheld pressure indicators combine tough and rugged design with accurate and reliable pressure measurement. New materials and technical innovations from over fifteen years experience with portable pressure testers has resulted in this advanced new product.

Compact, robust and lightweight, the GE Druck DPI705 Series is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting.

Improves Test Efficiency

No warm up time
16 pressure units
One minute leak test
Ambient temperature measurement

The calibration tools required to comply with quality assurance programs such as ISO9000 put ever increasing demands on maintenance budgets. The GE Druck DPI-705 Series, used in conjunction with pneumatic or hydraulic pressure generators, is a simple, low cost solution complementing the wide range of GE Druck portable process calibrators.



Special Features

Pressure units


psi, inHg, inH2O (4°C, 20°C and 60°F), ftH2O (4°C, 20°C and 60°F), mmHg, mHg, mbar, bar,mH2O, Pa, hPa, KPa, MPa, Kgf/cm2 and an optional user defined scale.

Leak test


A standard 60 second leak test

Max/Min


Captures both maximum and minimum readings

Zero


Zero pressure correction

Tare


0 to 100% FS zero offset capability

Filter


A 10 reading rolling average for unstable pressures.

Alarm


Adjustable high pressure alarm with visual andaudible warning.

Ambient temperature


°F and °C reading of local condition ±3°F (±1.5°C)

Calibration


Used with the optional pneumatic orhydraulic pumps, the GE Druck DPI 705 Series becomes a lowcost calibration tool for gauges and indicators.

Power management


Low battery indicator and selectable 'auto off'.



Specifications

Pressure Range


Pressure Range


Internal Sensor

1 or 3 psi (70 or 200 mbar)


Differential

10 psi (700 mbar)


Gauge

15 psi (1 bar)


Differential

30 psi (2 bar)


Gauge, Absolute

100 psi (7 bar)


Gauge

300 psi (20 bar)


Gauge

Accuracy


±0.1% FS non-linearity, hysteresis and repeatability

Environmental Specifications

Temperature
Performance Averaged
32°F to 122°F
(0°C to 50°C)


±0.01% rdg/°F (±0.02% reading/°C)
For absolute ranges < = 15 psi (1 bar) add ±0.025% FS/°F (±0.05% FS/°C)
For absolute ranges < 15 psi (1 bar) add ±0.01% FS/°F (±0.02% FS/°C)
Calibrated range: 32°F to 122°F (0°C to 50°C)
Operating range: 15°F to 122°F (-10°C to 50°C)

Humidity


0 to 95% non condensing

Overpressure


Safe to 2 x FS. Display flashes at 110% FS

Media Compatibility


Stainless steel, except positive differential non-corrosive fluid and negative differential dry gas.

Safety Conformance


EN61010, EN50081-1, EN50082-2, CE marked





Liên hệ: Mr Trường 0902736686

Copyright © 2006 | NAMDUONG EQUIPMENT JSC. | SURVEILLANCE EQUIPMENT DEPT.All Rights Reserved.

For | MARINE & PETROLEUM EQUIPMENT | Please visit: | HTTP://WWW.THIETBINAMDUONG.COM |

Công ty CP Thiết bị Nam Dương | Tel: 04 6675 2201 & 04 7306 9588 | Fax: 04 7307 9588 |

Email: info@congtuanninh.com | Website: http://congtuanninh.com | Sitemap |